Kramer Signal Extension & Switching
Kramer PT-572+ HDMI over Twisted Pair Receiver - India
The Kramer PT-572+ is the receiver half of Kramer's HDMI-over-twisted-pair extension pair, installed at the display end of a long cable run to recover a clean HDMI signal sent from a matching Kramer transmitter such as the PT-571. Wherever a source and a display are too far apart for a direct HDMI cable, the PT-572+ is the piece that turns the twisted-pair signal back into HDMI the display can use.
Best Deals Corporation supplies the PT-572+ as an authorized Kramer dealer in India, with genuine stock for AV integrators, systems houses, and government AV tenders that specify this receiver by model number.
Get a Quick Quote
Share your requirement — our team replies within a few hours with the best price.
What the Kramer PT-572+ Does on a Project
The PT-572+ sits at the far end of an HDMI-over-twisted-pair extension link, receiving the signal carried down a single structured cable from a matching Kramer transmitter and converting it back to a standard HDMI output that feeds a display, projector, or scaler. It is the essential counterpart to a transmitter like the PT-571 - without a receiver, the transmitted signal has nowhere to terminate, so the two devices are always specified and ordered together as a matched extension pair for a given link.
Typical Installation Scenarios
Integrators install the PT-572+ near the display end of a link - inside a rack behind a screen, in a ceiling void feeding a projector, or in an equipment cupboard adjacent to a large-format display - wherever the video needs to arrive after travelling a long distance over structured cabling from a source located elsewhere in the building. Common scenarios include a source or rack located in a central equipment room sending video out to a boardroom, lobby display, or auditorium screen some distance away, and government or PSU facilities where the AV source hardware is deliberately centralised in a technical room away from public-facing display areas. Because the receiver simply needs to sit close to the display, it also suits ceiling and wall-cavity installations where space is tight and a full rack shelf is not available.
Who Specifies and Buys This Unit
AV system integrators completing a point-to-point extension link, IT and facilities managers standardising their extension hardware on a known-good receiver model, and consultants writing detailed cabling and equipment schedules for AV tenders are the typical buyers of the PT-572+. Because Kramer part numbers are frequently named explicitly in government and PSU AV tender documents, buyers searching for a gov bid supplier India or a government tender bid India source for this exact part number need a dealer who can confirm genuine stock for both the receiver and its matching transmitter before a bid closes.
Buying for GeM and Government AV Projects
Best Deals Corporation is registered on GeM and works regularly with integrators and PSU procurement teams that need a gov registered supplier India or an e-tender bid supplier India for Kramer signal extension hardware. For the PT-572+, that means confirmed authorized-channel stock, formal quotations against tender line items covering the full transmitter-and-receiver pair, and GST-compliant invoicing and documentation to support the bid and the eventual delivery.
Genuine Stock, Warranty, and Pan-India Delivery
Every PT-572+ unit we ship is genuine Kramer product sourced through the authorized dealer channel, not grey-market stock, so the manufacturer warranty stands behind it. As a b2b supplier in India for AV integrators and a bulk wholesaler in India for systems houses ordering multiple extension pairs per project, we support project quantities, staggered delivery schedules tied to installation phases, and pan-India shipping so integrators outside Delhi can source this part with the same confidence as a dealer near me India relationship.
Why the Transmitter and Receiver Are Always Ordered Together
A PT-572+ receiver has no function without a compatible transmitter feeding it, and vice versa, so project bills of materials should always list them as a pair rather than as separate independent line items. Integrators managing several extension links on one project need to keep transmitter and receiver quantities matched exactly, and our team can help verify that a BOQ has the correct one-to-one count before an order is placed, which avoids a costly mismatch discovered only at installation.
Matching Receiver to Transmitter
The PT-572+ is designed to pair with a compatible Kramer HDMI-over-twisted-pair transmitter, such as the PT-571, for guaranteed compatibility. If you already hold a transmitter from an earlier purchase, confirm the exact model against the PT-572+'s documented compatibility before ordering, since mixing extension standards across different transmitter families is a common source of avoidable install-day issues.
Planning the Cable Run
Confirm the total cable run length between transmitter and receiver against the PT-572+'s rated distance for your target resolution before finalising rack and mounting positions, and use good-quality shielded twisted-pair cable along the entire run for reliable performance.
Placement at the Display End
Because the PT-572+ needs to sit close to the display, projector, or scaler it feeds, plan for a small mounting location with power access near that point - a rack shelf, a ceiling void, or a wall-mounted enclosure, depending on the installation.
One Receiver Per Link
Each PT-572+ serves one extension link from one transmitter. For projects with several source-to-display links, order matching quantities of transmitters and receivers, and talk to us if any link also needs source switching ahead of extension.
Warranty and AMC
As authorized-channel stock, the PT-572+ carries Kramer's standard manufacturer warranty. For multi-link or multi-site rollouts, we can discuss annual maintenance and spares-holding arrangements so a single failed unit does not stall an entire installation.
How to Order for a Project
Share your project BOM, including matched transmitter and receiver quantities, and your delivery timeline, and we will confirm stock, issue a formal quotation with GST invoicing, and coordinate pan-India delivery in line with your installation schedule.
Why Buy kramer PT-572+ – HDMI over Twisted Pair Receiver From Us
Genuine Products
100% authentic, brand-warranted stock — no grey market.
GeM Registered
Authorised seller on Government e-Marketplace for institutional buyers.
Pan India Delivery
Fast, tracked shipping to every state and union territory.
Bulk & Corporate Pricing
Volume discounts for offices, institutions and government tenders.
Genuine Kramer Stock, Fast Delivery
Sourced through the authorized Kramer channel, every PT-572+ we ship is genuine, warranty-eligible stock, dispatched pan-India for integrators working to tight installation schedules.
Warranty and Project Support
Full manufacturer warranty, GST-compliant invoicing, and direct project support for GeM and government tenders, backed by a team that understands point-to-point AV extension deployments.
Best Deals Corporation is an authorized dealer in India for Kramer Electronics, so the PT-572+ units we supply come with a clean, traceable supply chain and full manufacturer warranty backing - something a generic online marketplace listing cannot guarantee. For AV integrators, this matters when a client's facilities team asks for warranty documentation well after handover.
We work project-by-project with AV integrators rather than one unit at a time, so our pricing reflects bulk and project quantities for multi-link installations, and we routinely help confirm that transmitter and receiver counts on a BOQ match exactly before an order ships.
For government and PSU work, we operate as a gov registered supplier India on GeM, with the invoicing and documentation discipline procurement teams expect from an e-tender bid supplier India. Whether you are in Delhi NCR or sourcing pan-India, our team responds directly to project enquiries rather than routing you through a call centre.
Contact us at +91-9910809450 or info@bestdealscorp.in with your project details and we will move quickly on stock confirmation and quotation.
Frequently Asked Questions
It receives an HDMI signal transmitted over a twisted-pair cable from a matching Kramer transmitter and converts it back to standard HDMI to feed a display, projector, or scaler.
It is designed to pair with compatible Kramer HDMI-over-twisted-pair transmitters such as the PT-571. Confirm the exact model compatibility with our team before ordering if unsure.
No, the PT-572+ is a receiver only and requires a matching Kramer transmitter at the source end to complete the extension link.
Yes, we are a GeM registered seller and regularly support gov bid supplier India requirements, including formal quotations and GST invoicing for tender submissions.
Yes, we are an authorized Kramer Electronics dealer in India and supply only genuine, warranty-backed stock through the authorized channel, not grey-market imports.
Yes, we work as a bulk wholesaler in India for AV integrators ordering multiple transmitter/receiver pairs across a project, with pan-India delivery.
It should be installed close to the display, projector, or scaler it feeds, typically in a rack, ceiling void, or wall-mounted enclosure near that end of the extension link.
Yes, our team can review your project BOQ and confirm that transmitter and receiver counts are matched correctly before you place the order.